Iron Edison

Nickel Iron (NiFe) Lithium Iron (LiFePO4)

Free System Design! Call 720-432-6433

Inverters / Outback SkyBox Grid-Hybrid Inverter

 Outback SkyBox Grid-Hybrid Inverter

Click ABOVE to enlarge

Click BELOW to browse

  • Small
  • Small

Free system design.

No obligations.

Send any questions.

    Retail Price: $8,249.26
    Our Price: $7,119.98
    Item added to order

    The SkyBox hybrid grid tie inverter can be used as a grid-tie inverter with or without a battery. When used with a battery it can be used to enhance self-supply of solar energy. This is useful when net-metering, or grid feed is not available, or not advantageous financially. This system uses DC coupling for both the solar and the connection to the battery system for greater overall efficiency. The SkyBox uses any commonly available 48 VDC battery bank, any lead type, flooded, AGM, or gel, and many Lithium batteries. PV input voltage range is 200-600 VDC, allowing longer PV strings. Compliant with California rule 21 and Hawaii 14H grid support requirements.

    The system features backup power; grid support; net metering; non-export; and prioritized charging from renewables. These features can use any of the loads in the house, including those on the main service panel, what we call "primary" self-supply.Backup power is available to the loads connected to the backup loads panel, with a quick transfer time of 20ms. Backup power capacity is 5 kW. The inverter has ground fault and arc fault protection built in. CT’s can be installed on the house AC lines for export control. 5 year warranty. 47" H x 21" W x 9.4" D, 110.6 lbs.

    Features:
    *5,000 W backup power at 120/240 VAC
    *Balance of Systems in one box
    *Monitor and control over the internet using OPTICS RE
    *Internal Arc Fault Circuit Interrupter (AFCI) for added safety per NEC 2011: 690.11
    *Maximum backfeed to array is <8ms
    *Built-in battery system monitoring
    *NEMA 3R outdoor rated
    *Meets CA rule 21 and HI 14H grid connection requirements
    *Inverter operating temperatures of -6 °F to +140 °F (-20 °C to +60 °C).

    720-432-6433

    Give us a call
    We are happy to help!

    or email Info@IronEdison.com

     
    A brighter future, off the grid.

    A brighter future. Off the grid. Iron Edison battery systems can be used for 12, 24 and 48 volt applications. We can also help you optimize battery capacity to take better advantage of the solar, wind and other hardware you may already have in place.

    forever stamp
      ×

      Learn More