Free system design.
Send any questions.
|Nickel Iron (Ni-Fe) Battery - Battery Voltage: 12 Volt (10 cells @ 1.2 V ea.); Amp Hours Capacity: 200 Ah|
|3 305 Watt Canadian Solar SuperPower Solar Panels|
|Solar Top of Pole Mount - Model: TPM3 G-Series|
|OutBack FLEXmax FM60 / FM80 / FM100 MPPT Solar Charge Controller - Model: FLEXmax FM60 (150VDC)|
|Magnum MMS1012 12 Volt Pure Sine Wave Inverter/Charger|
|Magnum Remote Control and Display Panel - Model: ME-RC50|
|MidNite Solar Mini DC Disconnect / Power Panel - Breakers: MNDC125 125 Amp, 5 DIN|
|Circuit Breaker-DIN Mount-150VDC (MidNite Solar) - Amps: 100|
|Circuit Breaker-DIN Mount-150VDC (MidNite Solar) - Amps: 15|
|MidNite Solar Lightning Arrestor and Surge Protection Device (SPD) - Volts: 0-300 Volts DC|
|Solar PV Array Cable - Feet: 100 (MC4 Connector)|
|2 Battery Cable - 2/0 AWG (up to 195 amps)s - Size: 6 ft|
|Battery Vent Fan - Volts: 12 Volt|
|Total Retail: $6,379.11|
|Package Savings: $709.41|
A 12 volt 200Ah Nickel Iron battery with 2.2 usable kWh for 30+ years, a 945 watt ground mounted solar array, the industry leading Magnum 1,000 KW inverter and accessories round out this solution!
This is the perfect system for a small part time off-grid residence or other project.
Battery – The Nickel Iron battery is a very rugged 30+ year battery designed to withstand extreme climates and use! The 12 volt 200Ah size has 2.4 kWh of total capacity, and 2.2 kWh of usable capacity with its supported 80% depth of discharge. Nickel Iron batteries will require a vented battery enclosure and periodic watering (typically monthly).
Inverter – This 1,000 watt Magnum inverter has a pure sine wave output for your sensitive modern electronics. There’s also a single AC input for a backup generator or a grid connection to supplement the battery and/or solar.
Solar – a 915 watt top opf pole mount mounted PV array gives you great ultimate versatility in harvesting the sun’s energy, plus provides easy access to the array for cleaning and maintenance. In most parts of the continental US you can expect 2.8 – 4.0 KW of solar production on a typical sunny day; sufficient to completely recharge this battery. The PV racking system includes everything except the concrete and pole.
Accessories – This complete system includes a power panel, all the combiner boxes, DC circuit breakers and specialty wiring needed to install this system. Excluded items include standard wiring, and the concrete & pipe for the ground mount PV array.
Support – Iron Edison provides free phone support to assist with the installation and commissioning of this system, as well as any post commissioning questions!
A brighter future. Off the grid. Iron Edison battery systems can be used for 12, 24 and 48 volt applications. We can also help you optimize battery capacity to take better advantage of the solar, wind and other hardware you may already have in place.