Free system design.
Send any questions.
Discover AES LiFePO4 battery
The Discover AES batteries are an excellent choice for applications needing deep cycling on a daily basisas needed for off grid, self-consumption, peak load shaving, and other solar battery systems.
They use the commonly preferred LiFePO4 chemistry for stationary energy storage. It is thermally stable and has high cycle life compared to many other Li-ION technologies. The AES 42-48-6650 and AES 44-24-2800 batteries can be used with most 24 V or 48 V inverters and charge controllers
AES batteries have a built in Battery Management System (BMS) that keeps the individual cells balancedand within the correct parameters for longest life. If operating parameters are exceeded for over 2 minutes the battery will shut down.
The BMS monitors cell module voltage, battery voltage, battery current, battery temperature, and battery state of charge.
It keeps a log of this data and can send out fault and warning events.
There is an AEBus connection for communications between multiple batteries.
Each battery has an ON/OFF switch and an internal backupfuse.
The external communication connection will work directly with Schneider Conext network systems. It reports to the SCP or Combox as a battery monitor device.
This connection can also be used with the Discover LYNK© monitor and communication box.
Edge Cards (daughter boards) can be added to the LYNK to enable communications to specific inverter brands. A selection of cards will become available to match popular inverter brands.
Two EdgeCards can be used at one time for various inverters and charge controllers in one system.
LYNK enables closed loop communications providing adaptive, real time interaction between the Discover AES LiFePO4 battery and connected inverter system.
Remote reporting of battery status is available through the inverter monitoring and web services.
· Safe and robust LiFePO4 chemistry type, strong steel case
· Can be used as a lead acid battery replacement with 24 volt or 48 volt nominal inverters and solar chargers
· High ratecharge/discharge rated, and very high round trip efficiency
· Complete monitoring of all battery parameters is available
· Up to 20 AESbatteries can be installed in parallel for up to 133kWh of storage
· Convenient wall mount bracket is available for the AES 42-48-6650
The steel enclosureis rated to IP55 (approx.NEMA 3R) but is not recommended for outdoor exposure.
Terminals are post type, M8 female threads, with suppliedbolts and washers.
The charging temperature range is 32°F (0°C) to 113°F (45°C), with a recommended operating temperature range is 59°F (15°C) to 77°F (25°C) for maximum life and performance.
48 volt batteries are 13.7" W x18.5" D x 14.7" H.
24 volt batteries are 13.7" W x 13.0" Dx 10.8" H.
Listed to IEC62133(ed.2) pending UL1973 and UL2271.
Ships as Hazardous materials Class 9, UN3480(UNDOT).
Warranty is for 10 years service life, or throughput rating of 38MWh (42-48-6650) or 16MWh (44-24-2800) to 60% of original capacity.
Free solar + battery system design
Installer network across the USA
Free installation support
Lifetime technical support
Iron Edison is owned and operated by Brandon and Maggie Williams. They have three children, and live and work in Colorado.
Brandon and Maggie believe in energy independence and for the past 10 years they have helped thousands of people achieve their goal of powering their homes with batteries and solar. We love working everyday with our customers and we hope you decide to choose Iron Edison for your battery and solar needs.