Iron Edison

Nickel Iron (NiFe) Lithium Iron (LiFePO4)

Free System Design! Call 720-432-6433

Inverters / Schneider Conext XW+ Multi-Mode Inverter

 Schneider Conext XW+ Multi-Mode Inverter

Free system design.

No obligations.

Send any questions.

    Configure this product

    Item added to order

    Schneider Conext XW+ Multi-Mode Inverter

    The Conext XW+ inverter is a favorite among the Iron Edison staff, and highly recommended for grid-tied systems using either Nickel Iron or Lithium Iron batteries.

    The Conext XW+ Series hybrid inverter/charger has an innovative, integrated design that minimizes external balance-of-system components allowing for quick and easy installation as either a grid-tie battery backup system or a fully off-grid power system. The XW+ offers split-phase 120/240 VAC output from a single inverter. Up to four inverters can be paralleled for up to 27 kW of total output in a 120/240 VAC split-phase system. The XW+ inverters can be converted to 120 VAC only and three inverters can be configured into a 120/208 VAC three-phase system. Charge controllers, such as the Schneider Electric XW-MPPT60-150 or the XW-MPPT80-600, are required for use with any PV array (see Charge Controllers).

    Dual AC inputs enable AC generator input as well as grid interaction. An optional automatic generator start (AGS) unit is also available. A configurable auxiliary relay with an output of 250 mA at 12 VDC is included in each inverter. A battery-temperature sensor is included with each inverter, but only one is needed per system. The inverter is field-serviceable on the wall. The XW+ comes with a 5-year warranty and is listed to UL 1741 for the U.S.A. and Canada. These inverters are NOT currently listed to the new UL1741-SA standard and cannot be installed connected to utilities in areas where that is required. Dimensions of the inverter are 23"H x 16"W x 9"D. The Conext XW Pro hybrid inverter/charger is an updated version of the XW+ line. The XW Pro has the ability to adapt to the new utility requirement for grid tied inverters. They are now listed to the new UL1741-SA standard and can be installed and connected to utilities in areas where that is required, such as California Rule 21.

    A Conext System Control Panel, is needed to complete a Schneider Electric system.

    starting from $3,146.98

    720-432-6433

    Give us a call
    We are happy to help!

    or email Info@IronEdison.com

     
    A brighter future, off the grid.

    A brighter future. Off the grid. Iron Edison battery systems can be used for 12, 24 and 48 volt applications. We can also help you optimize battery capacity to take better advantage of the solar, wind and other hardware you may already have in place.

    forever stamp
      ×

      Learn More