Solar and Battery accessories from Iron Edison
NO MORE BUYING DISTILLED WATER! Complete Deionizer System ready to mount on the wall and use with tap water. The Deionizer is pressurized to use directly with Philadelphia Scientific Battery Watering Guns.
|Our Price:||$ 285.00|
The Power Vent controls battery box venting, removing hydrogen gas while reducing cold air infiltration into the box.
This rugged and reliable fast-flow watering gun works with the HydroPure Deionizer, HydroCart or HydroFill watering carts to efficiently maintain your Nickel Iron batteries.
|Our Price:||$ 98.00|
Complete 1 KW wind turbine package to add wind generation to an off-grid solar system.
The ML-Series Remote Battery Disconnect Contactor / Solenoid Switch provides high-current carrying and disconnect capability under 12V 500A load.
|Our Price:||$ 178.45|
DIN Rail Mount 150 VDC Circuit Breaker from MidNite Solar
High Voltage 300V DC rated, DIN Mount circuit breaker for your solar system
600Volt DC Circuit Breaker
|Our Price:||$ 104.98|
150VDC & 300VDC DIn Mount Ground Fault Protection from MidNite Solar
125VDC Panel Mount Breaker - 3/8" studs 1.5" AIC 50,000 at 125VDC
|Our Price:||$ 99.98|
Panel Mount 150VDC Breaker for Outback Power Panels and Load Centers
7 Function Digital Multimeter reads DC voltage, DC current, AC voltage, resistance, transistor test, diode test, and battery test. Includes an LCD readout, positive set selector switch, and 32" leads.
|Our Price:||$ 12.50|
Circuit-Level Energy Monitoring and a great looking system interface for informed decision-making
FUSE, 15Aor 30A, 600VAC/600VDC, CLASS R, TYPE SR
600V Rated DC fuse for your solar installation
|Our Price:||$ 6.98|
This 20 gallon, AC powered watering cart is perfect for watering 48 volt and larger 24 volt Nickel Iron battery banks.
|Our Price:||$ 750.00|
This 10 gallon, AC powered watering cart is perfect for watering 12 volt and smaller 24 volt Nickel Iron battery banks.
|Our Price:||$ 435.00|
Package including the 10 Gallon HydroCart Mini, hose and Gun-X.
|Our Price:||$ 499.98|
This 10 gallon, battery powered watering cart is perfect for watering Nickel Iron battery banks when AC power is not available..
|Our Price:||$ 725.00|
Battery Heater Kit 14kW RESA (120V)
|Our Price:||$ 150.00|
Carburetor heater, 120 VAC
|Our Price:||$ 92.00|
The UltraPad provides a sturdy, permanent base for residential generators that won't shift, crack or degrade over time.
|Our Price:||$ 479.00|
The Power Panel is a necessary part of an inverter installation. The battery and inverter's Circuit breakers and the remote control mount on the front of this electrical cabinet. 175 Amp Version requires 2/0 Battery Cable. 250 Amp version requires 5
Expandable Power Panels to stack up to 4 MagnaSine Inverters!
This remote display and control unit has convenient finger-tip operation, including one-knob programming.
Magnum AC Load Diversion Controller ACLD-40
|Our Price:||$ 799.20|
The Magnum ME-AGS-N Auto Generator Start controller is networked to a Magnum inverter and can automatically start your generator based on battery voltage or inside temperature. Starts most diesel or gas generators.
|Our Price:||$ 263.20|
Metal backplate for easy mounting of any Magnum inverter and power panel
Acting as a “fuel gauge” for your batteries, the ME-BMK monitors their state of charge (SOC) and then provides this information in an easy-to-understand display via the ME-ARC or ME-RC remotes.
MagWeb Monitoring Kit The MagWeb is a powerful and cost effective tool for remotely monitoring Magnum Energy’s inverters and accessories. Installed on the Magnum network, the MagWeb provides live Internet monitoring of the inverter, battery monitor,
|Our Price:||$ 623.20|
Great data, easy installation, and NO monthly monitoring fees!
|Our Price:||$ 339.20|
The bezel is a molded plastic frame that you can use to surface/wall mount your Magnum remote control (ME-RC50, ME-ARC50)
|Our Price:||$ 19.25|
The DC Distribution 500A is a busbar connecting battery, inverter, charger, solar and DC loads, includes fuses and digital monitoring. It enables you to connect up to 4 different DC devices safely. The internal fuses are monitored and their state can
|Our Price:||$ 375.78|
EasyView 5 monitoring and Control Panel for the masterbus network
|Our Price:||$ 297.47|
MasterBus Combi Interface This interface integrates a Mastervolt Mass Combi in a MasterBus network and allows it to be operated or monitored via a MasterView panel or PC. Mastervolt Masterbus Combi Inverter Interface part 77030475
|Our Price:||$ 230.09|
MasterBus – USB interface Communication interface between your PC and the MasterBus network. Product 77030100
|Our Price:||$ 185.05|
Mastervolt MasterShunt 500A Battery Current Sensor for Lithium SOC. MasterShunt is the heart of every MasterBus energy system. This integrated battery monitor shares information about the battery bank with other Mastervolt devices. #77020110
|Our Price:||$ 249.98|
General use powder coated aluminum enclosure for retrofits, small inverter disconnect, PV disconnect, AC or DC distribution.
|Our Price:||$ 39.98|
Battery combiner box for multiple inverter installations, 1000 Amp rating
|Our Price:||$ 699.98|
Busbars for DC breaker box, made in the USA by MidNite Solar
|Our Price:||$ 16.98|
10 Position 1000 Volt rated combiner box
|Our Price:||$ 219.98|
1000 Volt DC rated solar combiner box for fuses or breakers (4 position box)
|Our Price:||$ 144.00|
MidNite String Combiner box, up to 12 150VDC strings from your solar array
|Our Price:||$ 169.98|
This is a very important part of your solar array. This Solar Combiner Box has space for up to 3 DC circuit breakers.
|Our Price:||$ 89.98|
These powder-coated aluminum, rainproof array combiners will accept DIN-rail mounted 150v circuit breakers, MidNite 300VDC breakers, or 600VDC fuse holders for grid-tie arrays.
|Our Price:||$ 109.98|
The MidNite Solar Surge Protector Device is designed for both AC and DC systems
|Our Price:||$ 109.98|
Midnite Solar Power Panel with DC Disconnect
General use enclosure for 15 panel mount type breakers from 5 - 100 Amp as well as a single 125, 175 or 250 amp breaker if so desired.
|Our Price:||$ 269.98|
6000 Watt Autoformer for single inverter AC Coupled systems.
|Our Price:||$ 1,199.98|
This E-Panel includes the master breaker, bypass, AC input and output breakers.
The FLEXware 250 for FX Series Inverters accommodates all of the essential protective devices in the smallest possible space at the lowest installed cost.
|Our Price:||$ 119.98|
The FLEXware 500 system architecture can support up to two OutBack FX Series Inverter/Chargers, up to two OutBack charge controllers and all the associated AC and DC components.
The FLEXware 1000 system architecture is capable of supporting up to four OutBack FX Series Inverter/Chargers, four OutBack charge controllers, and all the required AC and DC components and wiring.
The MATE3 System Display and Controller make it easier than ever to program and monitor a complete OutBack Power system.
|Our Price:||$ 595.00|
OutBack Power's FLEXnet DC is the ultimate DC system monitoring device. Our integrated networked communications make valuable, usable data available from your system and viewable on an OutBack MATE communications device, providing you with the critic
|Our Price:||$ 339.98|
The HUB system communications manager is the backbone of your networked OutBack power conversion system.
Pre-Wired Power Panel for Outback Radian Series Inverters.
AC Bypass includes: Six 60A 120VAC single pole DIN mount breakers, sliding bypass interlock plate, wire and hardware kit.
|Our Price:||$ 229.98|
FLEXmax charge controller mounting bracket for two side mounted FLEXmax Charge Controllers on FW500 or FW1000 DC enclosures – with hardware
|Our Price:||$ 59.98|
FLEXmax charge controller mounting bracket for two top mounted FLEXmax Charge Controllers on FW500 or FW1000 DC enclosures – with hardware
Mounting Bracket for the Outback Mate3 Controller. Choice of flush mount, surface mount, or one the side of the Outback Radian inverter.
|Our Price:||$ 39.98|
Wide range of DC to DC voltage regulators for DC loads needing constant voltage.
Remote Control for Inverter/Chargers EVO-2212, EVO-3012, EVO-2224, EVO-4024 The EVO-RC is intelligent remote control designed specifically for use with NEW Samlex EvolutionTM Series of Inverter/Chargers.
The Conext Automatic Generator Start (AGS) can automatically activate or stop a generator in response to changing power requirements.
|Our Price:||$ 200.00|
Conext Battery Monitor indicates hours of battery based runtime and determines battery bank state of charge.
|Our Price:||$ 480.00|
The Conext™ ComBox is a powerful communications and monitoring device for installers and operators of Conext solar systems. It features an integrated web server, enabling graphical displays of system daily, monthly and lifetime energy data.
|Our Price:||$ 390.00|
The System Control Panel (SCP) gives you a single point to setup and monitor all your SW and XW+ components.
|Our Price:||$ 300.00|
The C-Series Meter Display provides real time data on current from the PV array or DC load, battery voltage, watts, and resettable amp hours.
|Our Price:||$ 99.98|
Schneider SW AC Power Distribution Panel and DC Disconnect allow for a safe and professional installation
|Our Price:||$ 885.00|
Conext XW+ Power Distribution Panels and Battery Disconnect for Conext XW+ Inverters by Schneider Electric
The XW+ Connection Kit is used to connect additional inverters into an XW+ Power Distribution Panel.
|Our Price:||$ 890.00|
AC Breakers for adding an additional inverter to a Schneider system.
|Our Price:||$ 185.00|
Shunt for battery current monitoring
|Our Price:||$ 39.98|
System monitoring, remote diagnosis, data storage and visualization.
|Our Price:||$ 775.00|
Piggyback Card for TLUS-12 and US-12 inverters allowing connection to Sunny Webbox for connection to internet and Sunny Portal for monitoring.
|Our Price:||$ 139.98|
SMA SI-485PB-NR SUNNY ISLAND PIGGYBACK CARD WITH RJ45 CABLE. For use with the Sunny Island inverter in an AC coupled system to communicate with the grid tie inverter.
This is a handy wrench that helps you take apart the clips on solar panel wires.
|Our Price:||$ 8.99|
600 Volt 30 Amp rated DC disconnect - CAN accept Class R fuses.
|Our Price:||$ 299.98|
PicoCell Pump Controller uses solar and/or battery. Pair with SolProtect Disconnect and optional Power Blending Controller in a Pre-Configured PicoPanel Assembly.
Turnkey Submersible Pump Kit, Turnkey Solar Pond Aeration Kits, TOP Mount Solar PV Array Kits, Ground Mount Solar PV Array Kits